ANSI/IEEE C63.2-1980

ANSI/IEEE C63.2-1980 American National Standard Specifications for Electromagnetic Noise and Field Strength Instrumentation, 10 kHz to 1 GHz

ANSI/IEEE C63.2-1980 Американский национальный стандарт спецификации для электромагнитного шума и напряженности поля Instrumentation, 10 кГц до 1 ГГц

This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 kHz to 1000 MHz incorporating quasi-peak, peak, rms and average detectors. NOTE: Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sine waves, and components of electric and electromagnetic disturbances, including transients which may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter. With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comite International Special des Perturbations Radioelectriques (InternationalSpecial Committee on Radio Interference) (CISPR). An optional discharge time constant is specified also.