IEEE

IEEE 1210-2004

IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable

IEEE 1210-2004

IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable


Не действует

Дата ввода
23.03.2005
Дата утверждения
Тип Цена
Электронная версия ( PDF ) По запросу
Печатная копия По запросу
Redline - Электронная версия ( PDF ) По запросу
Redline - Печатная копия По запросу

Наименования

IEEE 1210-2004 IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable

Утверждено

Информация отсутствует

Область применения

This standard applies to cable-pulling lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable-pulling lubricants are used to lower the friction on cables when they\nare installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cablepulling lubricants should be compatible with the cable. They should not interfere with the function of any\ncomponent of the cable system that they contact.\nCompatibility of cable-pulling lubricants with cable coverings is the only subject of this standard. Other important performance criteria for cable-pulling lubricants, such as friction reduction, toxicity, combustibility, and so on, are not discussed. This standard uses accepted cable performance standards whenever possible. Relevant standards are cited in the text and listed in Clause 2 and Annex A.

Разделы

IEEE [4] IEEE Power and Energy Society

Изменения

Информация отсутствует

Основополагающие документы

Информация отсутствует

Документ заменяют

Информация отсутствует

Документ заменил

Информация отсутствует

Основополагающие документы

Информация отсутствует