IEEE

IEEE 753-1983

IEEE Standard Functional Methods and Equipment for Measuring the Performance of Dial-Pulse (DP) Address Signaling Systems

IEEE 753-1983

IEEE Standard Functional Methods and Equipment for Measuring the Performance of Dial-Pulse (DP) Address Signaling Systems


IEEE 753-1983

IEEE Standard Функциональные методы и оборудование для измерения производительности Dial-Pulse (DP) Адрес сигнальных систем


Не действует

Дата ввода
23.06.1983
Дата утверждения
Тип Цена
Электронная версия ( PDF ) По запросу
Печатная копия По запросу
Redline - Электронная версия ( PDF ) По запросу
Redline - Печатная копия По запросу

Наименования

IEEE 753-1983 IEEE Standard Functional Methods and Equipment for Measuring the Performance of Dial-Pulse (DP) Address Signaling Systems

IEEE 753-1983 IEEE Standard Функциональные методы и оборудование для измерения производительности Dial-Pulse (DP) Адрес сигнальных систем

Утверждено

Информация отсутствует

Область применения

The scope of this standard is two-fold. First, to establish and define requirements for methods which can be used to measure the performance of dial-pulse address signaling systems used with voice frequency telecommunications equipment. Second, to establish functional requirements for test equipment needed to make the measurements. Such standard conditions as will be possible with these methods and means are mandatory if consistent and repeatable test results are to be obtained.This standard will be limited to the parameters of dial-pulse signaling systems used in the North-American network that affect addressing performance. These parameters shall be measured at appropriate access points within the telecommunications switching system, on associated local subscriber loops, on trunks interconnecting switching systems, or on station apparatus.Measurements of supervisory signals or of the time relationship between supervisory and dial-pulse address signals, are not included.Signaling systems other than dial pulse (for example, single frequency in-band or out of band) which results in a dial-pulse address may require testing using methods and equipment covered by this standard.

Разделы

[12] IEEE Communications Society

Изменения

Информация отсутствует

Основополагающие документы

Информация отсутствует

Документ заменяют

Информация отсутствует

Документ заменил

Информация отсутствует

Основополагающие документы

Информация отсутствует