IEEE 62-1958 IEEE Recommended Guide for Making Dielectric Measurements in the Field

IEEE 62-1958 IEEE Рекомендуемые Руководство по Создание Диэлектрические измерения в области

The following general methods of test are either discussed or referred to in this publication:Low-frequency, low- and high-voltage losscharacteristic measurements. The measurement at power frequencies of power factor, dissipation factor or watts loss and capacitance or charging current; or equivalent quantities which define the electric circuit constants of the test specimen in the voltage range of approximately 80 volts to 50 kilovolts or higher. (2) Alternating-voltage corona measurements. The determination of the presence of corona discharge in the test specimen, usually related to the magnitude of the applied power-frequency voltage. The presence and the severity of corona are usually determined by indirect means; for example, by the resultant increase in dielectric loss or by the measurement of high-frequency components in the current (3) Alternating-voltage distribution measurements. The measurement of the potential of the terminal electrodes and of one or more defined points between the high-and low-voltage electrodes of the test specimen, usually with applied voltage of power frequency.